Руководство По Работе для Brother NX-2000
SEWING THE STITCHES
82
b
Leave a seam when sewing the scallop
stitches so that the pattern is not sewn
directly on the edge of the fabric.
stitches so that the pattern is not sewn
directly on the edge of the fabric.
c
Trim along the seam, making sure not to cut
the stitches.
the stitches.
Top Stitching
For a decorative effect in a crazy quilt, stitches can be
sewn over a pressed seam allowance.
sewn over a pressed seam allowance.
a
Select a straight stitch, and then attach
presser foot “J”.
presser foot “J”.
b
With right sides together, sew two pieces of
fabric, and then open the seam allowances.
fabric, and then open the seam allowances.
a
6.5 mm (1/4inch)
b
Wrong side of fabric
c
Straight stitch
d
Seam allowance
c
Turn the fabric over so the right side faces up,
and then sew over the seam with the center of
the presser foot aligned with the seam.
and then sew over the seam with the center of
the presser foot aligned with the seam.
* Select one of the following stitches.
a
Surface of fabric
Smocking
The decorative stitching created by sewing over gathers
is called smocking. It is used to decorate the front of
blouses or cuffs.
is called smocking. It is used to decorate the front of
blouses or cuffs.
a
Select a straight stitch, and then attach
presser foot “J”.
presser foot “J”.
b
Set the stitch length to 4.0 mm (approx.
3/16 inch) and the thread tension to 2.0
(loose tension).
3/16 inch) and the thread tension to 2.0
(loose tension).
c
Pull out 50 mm (approx. 1-15/16 inches) of
both the upper and bobbin threads.
both the upper and bobbin threads.
d
Sew stitching 10 mm (approx. 3/8 inch) apart.
a
Approximately 10mm (approx. 3/8 inch)
Note
Sew test stitches on the fabric before sewing on your
project.
project.
a
b
b
c
d
Note
Make sure that the automatic reverse/reinforcement
stitching and automatic thread cutting settings are not
selected.
stitching and automatic thread cutting settings are not
selected.
a
a