Руководство По Работе для Brother PR1050X

SELECTING/EDITING/SAVING PATTERNS

181

After making the desired changes, touch

→ The pattern editing screen appears again.

Changing the text arrangement of
a character

Characters can be arranged on a horizontal line,
on a slant or on an arc.

Touch .

→ The screen shown below appears.

• For details on each key, refer to “Changing the text

arrangement” on page 158.

Touch the key of the desired text
arrangement.

After selecting the desired text
arrangement, the bend of the curve can be
adjusted. If necessary, touch

and

to adjust the bend of the curve.

If necessary, touch the arrow keys to adjust
the position of the pattern.

(For more details, refer to page 176.)

After making the desired changes, touch

→ The pattern editing screen appears again.

Changing the character spacing

The spacing between the characters can be made
wider or narrower.

Touch .

→ The character spacing screen appears.

CAUTION

• After changing the angle of the pattern, check

the icons for the embroidery frames that can
be used and use only the indicated frames. If a
frame other than those indicated are used, the
presser foot may hit the embroidery frame and
cause injuries.

Memo

• If

in the embroidering settings screen

is used, the entire combined pattern can be
rotated. (For details, refer to “Rotating the
entire pattern” on page 201.)

• If the pattern is too large or the pattern is

too close to the edge of the embroidery
field, all of the rotating options may not
apply.

Memo

• When selecting

and

change to

and

. You can

increase or decrease the incline.

Memo

• The text arrangement specified when the

character was selected on page 158 can be
changed at this point.