Руководство По Работе для Brother PR1050X
SELECTING/EDITING/SAVING PATTERNS
183
5
Trimming the threads between
characters
characters
If the machine is set to trim the threads between
the characters, the jump stitches between the
characters are reduced and any other necessary
procedures after embroidering are reduced.
However, the embroidering time will increase if
the threads are trimmed between each of the
characters.
the characters, the jump stitches between the
characters are reduced and any other necessary
procedures after embroidering are reduced.
However, the embroidering time will increase if
the threads are trimmed between each of the
characters.
a
Touch
so that it changes to
.
• Each touch of the key turns the setting either on or off.
Combining the separated
character patterns
character patterns
Two separated lines of character patterns can be
combined. The characters can be aligned to the
specified order. You cannot combine the lines of
character patterns if the text contains a line feed
using the Line Feed function.
combined. The characters can be aligned to the
specified order. You cannot combine the lines of
character patterns if the text contains a line feed
using the Line Feed function.
a
Touch .
→ The following screen is displayed.
b
Select the group of character patterns that
you want to combine.
you want to combine.
• You can select the patterns by touching them on the
screen, or touching
or
to check the patterns
to be selected, and then touch
.
→ Numbers 1 and 2 are assigned temporarily to the
patterns.
c
Touch
or
to choose the order of
the 2 patterns.
Threads are not
trimmed.
Threads are
trimmed.
Memo
• The selected character is assigned as
Number 1.