Руководство По Работе для Brother PR1050X
STITCH SETTINGS SCREEN
15
Before creating the embroidery pattern, specify the stitch settings. Lines of the design are sewn with
various stitches and areas are sewn with fill stitches or stippling stitches. Stitching of the areas was already
selected in “Drawing Regions” on page 10, so specify values of detailed settings.
various stitches and areas are sewn with fill stitches or stippling stitches. Stitching of the areas was already
selected in “Drawing Regions” on page 10, so specify values of detailed settings.
After specifying the settings, press
to create the embroidery pattern.
If the design data is saved, the settings can be changed after a trial embroidering.
Specifying individual stitch
settings
settings
Select a pattern in the stitch settings screen to
specify its line and region stitch settings. If multiple
patterns are selected, the settings are applied to
those patterns.
specify its line and region stitch settings. If multiple
patterns are selected, the settings are applied to
those patterns.
■ Line settings
a Shows the stitch type and color for the selected
line.
b Shows the stitch settings for the selected line.
Line sew stitch settings
Select the type of stitching you want applied to your
line art, from zigzag stitch (
), running stitch
(
), triple stitch (
), candlewicking stitch
or chain stitch
.
Zigzag stitch
Running stitch
/Triple stitch
* Both includes an under sewing.
Candlewicking Stitch
Chain stitch
■ Region settings
a Shows the stitch type and color for the selected
region.
b Shows the stitch settings for the selected region.
Fill stitch settings
STITCH SETTINGS SCREEN
Zigzag width Specifies the width of the zigzag stitches
used to sew the lines of the design.
Density
Specifies the density of the zigzag stitches
used to sew the lines of the design.
used to sew the lines of the design.
Run pitch
Specifies the length of the straight stitch of
the design.
the design.
a
b
Size
Increases/reduces the size of the pattern.
Spacing
Specifies the spacing of the candlewicking
stitch.
stitch.
Size
Increases/reduces the size of the pattern.
Repetition
Sets repeated sewing at the same part.
Direction
Specifies the sewing direction. Select
“Manual” to change to the desired direction
of fill stitch.
“Manual” to change to the desired direction
of fill stitch.
Density
Specifies the stitch density of fill stitch.
Pull
compensation
Specifies to correct the shrinkage of the
pattern by slightly shortening or lengthening
the stitching. Change the setting after you
embroider the pattern and can check the
shrinkage.
pattern by slightly shortening or lengthening
the stitching. Change the setting after you
embroider the pattern and can check the
shrinkage.
Under
sewing
Select if you need or do not need the under
sewing for the stabilized fabric.
sewing for the stabilized fabric.
a
b