Руководство По Работе для Brother PR1050X
STITCH SETTINGS SCREEN
16
Stippling stitch settings
Decorative fill
a
Use
to select the line or region to be
changed.
Each press of
moves the highlighting of the
selected pattern in order.
b
Select the setting to be changed, and then
change the setting in the screen that
appears. (In this example, the sewing
direction will be changed.)
change the setting in the screen that
appears. (In this example, the sewing
direction will be changed.)
The setting screen appears.
c
Press
, and then use
to change the
direction.
d
Press
to apply the setting.
*
appears on the tab for settings that were changed.
*
Change other settings in the same way.
Specifying global stitch settings
The same stitch settings can be changed at the
same time for multiple patterns of the same type.
same time for multiple patterns of the same type.
a
Use
to select the stitch whose settings
are to be changed, and then press
.
The same stitch type areas will be selected at the
same time.
b
Follow steps
b
through
d
in “Specifying
individual stitch settings” on page 15 to
change the settings.
change the settings.
After specifying the settings
generate embroidery pattern
generate embroidery pattern
Press
to create the embroidery pattern.
Run pitch
Specifies the length of a stitch of the
stippling stitch.
stippling stitch.
Spacing
Specifies the spacing between the stitches
when embroidering the stippling stitch.
when embroidering the stippling stitch.
Distance
Specifies the offset from the pattern outline.
Size
Increases/reduces the size of the pattern.
Direction
Specifies the rotation angle of the pattern.
Outline
Select whether (ON) or (OFF) the outline is
also converted to embroidery data. If “ON” is
selected, the number of thread jumps can be
reduced.
also converted to embroidery data. If “ON” is
selected, the number of thread jumps can be
reduced.