Руководство Пользователя для Brother PR-600/600C
5
ENGLISH
Fabrics
For best results, it is recommended to use the
following types of fabrics.
following types of fabrics.
• 100% cotton
• 35% cotton/65% polyester
• 80% wool/20% nylon
• 15% wool/85% acrylic
Fabrics that are difficult to hoop, wrinkle easily or
shrink are not recommended to be used with the
cylinder frame. Fabrics such as:
shrink are not recommended to be used with the
cylinder frame. Fabrics such as:
• Polyester foam
• Stretch fabrics
• Melton wool
• 100% nylon
• Suede
Note
● Patterns that misalign easily should not be
embroidered using this cylinder frame.
● Only use one-point embroidery patterns or
letters on ribbed knit fabrics.
Preparing to use the cylinder
frame
frame
■ Installing the cylinder frame driver
Remove the embroidery frame holder from the
carriage, and then install the cylinder frame
driver.
carriage, and then install the cylinder frame
driver.
Memo
● Before removing the embroidery frame
holder, remove the embroidery frame. For
details on the removal procedure, refer to
“Removing the embroidery frame” in the
Operation Manual.
details on the removal procedure, refer to
“Removing the embroidery frame” in the
Operation Manual.
a
Loosen and remove the two thumb screws,
and then remove the embroidery frame
holder.
and then remove the embroidery frame
holder.
1
Thumb screws
2
Embroidery frame holder
• The removed thumb screws remain attached
to the embroidery frame holder.
1
Leave the two thumb screws attached so they
are not lost.
are not lost.
2
Embroidery frame holder
b
Remove the two upper thumb screws of the
cylinder frame driver, and then loosen the
two lower thumb screws.
cylinder frame driver, and then loosen the
two lower thumb screws.
1
Upper thumb screws (smaller)
2
Lower thumb screws (larger)
1
2
1
2
a
b