Инструкция С Настройками для Brother PE-DESIGN 10
177
Tutorial 9-1: Creating Split Embroidery Designs
Tutorial 9-1: Creating Split Embroidery
Designs
Layout & Editing has a function for creating split embroidery designs when the embroidery pattern being
created is larger than the embroidery hoop.
The sample file for this tutorial is located at Documents (My documents)\PE-DESIGN 10\Tutorial\Tutorial_9.
created is larger than the embroidery hoop.
The sample file for this tutorial is located at Documents (My documents)\PE-DESIGN 10\Tutorial\Tutorial_9.
1
Click ,
then
[Design Settings].
2
Specify the Design Page size and the size of
the design sections.
the design sections.
a
Select the type of embroidery machine to
be used.
be used.
b
Select [Custom Size], and then type or
select the desired width and height for the
Design Page. This setting is to specify the
exact width and height of a design. For
this example, set width to 230 mm and
height to 330 mm.
select the desired width and height for the
Design Page. This setting is to specify the
exact width and height of a design. For
this example, set width to 230 mm and
height to 330 mm.
c
Click the [Section Size (for Hoop Size)]
selector, and then select the size of the
sections (your embroidery hoop). For this
example, select 120 × 170 mm
(130 × 180 mm).
selector, and then select the size of the
sections (your embroidery hoop). For this
example, select 120 × 170 mm
(130 × 180 mm).
3
Click [OK].
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 1
Specifying the Design
Page size in Layout &
Editing
a
b
c
b
• With the [Section Size (for Hoop Size)] setting,
the width and height of the sections are 10mm
smaller than the actual hoop size in order to
smaller than the actual hoop size in order to
provide space for fine positioning adjustments
with adjustment sections. The 10mm is for
overlapping.
overlapping.
• It is not necessary for the [Section Size (for
Hoop Size)] to match the Design Page size.
Select the hoop size to be used for sewing.