Инструкция С Настройками для Brother PE-DESIGN Ver.4,3,2

106

2

When you click 

, the black and white image is displayed and you are in Stage 2.

Note that all the colors that you selected and turned on are converted to black. It is recommended 
to select just as many colors as necessary to have a good outline of the image. In the above exam-
ple, a single color was selected.
In Stage 2, you can edit the image using the pens and erasers and use the zooming tools.
Note that if you do not like the result, you can go back to Stage 1 and select different colors.

“To Original Image” on page 104, “To Figure Handle” on page 106, “To Sew Set-
ting” on page 108

■

Moves to Stage 3.

No shortcut key for this function

1

Click 

, then 

.

If you were in Stage 4, a message warns you that may lose some data if you go back to Stage 3. If 
you want to make sure no data is lost, click 

 in that dialog and save your settings. Other-

wise, click 

 and you are returned to Stage 3.

If you were in Stage 2, this dialog displays. 

◆

Set the resolution. For details, see the following 
table.

◆

Set the thinning process. For details, see the 
following table.

◆

Set the size as a percentage of the original using 
the 

 slider (setting range: 25 % - 400 %). 

You will not be able to enlarge the image beyond 
the limits of the Design Page area. If necessary, 
set the Design Page size by clicking 

 and selecting one of the two other 

Design Page sizes in the dialog that opens.

The preview window reflects the setting 
changes you make.