Инструкция С Настройками для Brother PE-DESIGN Ver.4,3,2

192

 

The cursor selection mode is used to select one or more lines. Once a line is selected, you can move it, 
scale it, and change its direction by rotating it or inverting it.

■

1

Click 

 on the Tool Box. The shape of the cursor changes to 

.

2

Click the line that you want to select.
You know that the line is selected when handles are displayed.

Note:
Apattern will not be selected if you do not click on a part of it.

3

To deselect the line, select another one, click on an empty space or click another button of the Tool 
Box.

4

To select an additional line, click that line while holding the 

 key down.

NOTE:
You can also select lines by dragging the cursor across the Work Area. As you drag, a dotted rect-
angle appears. When you release the mouse button, all lines that are completely contained in that 
rectangle will be selected.
If other lines that you did not want selected are selected, click on an empty space to deselect all 
lines, and then start again.

■

1

Move the cursor over a selected pattern or group of selected patterns.

The shape of the cursor will change to 

.

2

You can now drag the pattern to another location.

Sets the cursor in select mode.

Cursor shape: 

Sets the cursor in point edit mode.

Cursor shape: 

Sets the cursor in line drawing mode. When you start the application, the 
drawing mode is active by default.

Cursor shape: 

 with a miniature of the tool button