Справочник Пользователя для Samsung SR8F40

 

operating

inStaLLinG tHe VaCUUm CLeaninG roBot

installation order

To use the vacuum cleaning robot, you must turn on the Power Switch 
at the bottom of the main unit.

To charge the vacuum cleaning robot, you must first install the charger.
Since the battery is discharged when the product is purchased, you 
must fully charge the battery before use.

You should charge the battery completely before using the vacuum 
cleaning robot.

You can confine the vacuum cleaning robot to a particular section by using Fence (virtual wall) 
mode.

turning the power Switch on or off

To use the vacuum cleaning robot, you must turn the Power Switch 
on.
If you turn off the Power switch, all settings except for the current 
time and the Weekly reservations are reset.

 

❈

If no key is pressed for approximately 1 minute after turning the 
power on, the power is automatically cut to prevent the battery 
discharging.  
To turn the power on again, press and hold the power (Start/
Stop) button on the main body.

 

- If the icons are not turned on, it indicates that the battery charge 

is depleted. In this case, dock the vacuum cleaning robot to the 
charger station after turning the Power Switch on.

 

- The configured time may be different from the current time. If the 

configure time is incorrect, set the time to the current time. 

If the Power Switch is turned off, the vacuum cleaning robot will 
not be charged even if it is docked with the charger station.

Operating the cleaner