Справочник Пользователя для Samsung SL-C4060FX
Network settings (configuring TCP/IP) |
138
Network settings (configuring TCP/IP)
When you connect your machine to a network, you must first configure the TCP/IP settings for
the machine. The settings shown below are the basic settings required for using your machine as
a network machine. You can set TCP/IP, DNS server, TCP/IPv6, Ethernet, and IP address allocation
methods.
the machine. The settings shown below are the basic settings required for using your machine as
a network machine. You can set TCP/IP, DNS server, TCP/IPv6, Ethernet, and IP address allocation
methods.
Ethernet
You can set Ethernet settings.
Tap
Settings > Network Settings > Ethernet from the home screen or Apps.
You can also use this feature from the SyncThru™ Web Service. Open the Web browser
from your networked computer and type the IP address of your machine (see "Settings
tab" on page 199).
from your networked computer and type the IP address of your machine (see "Settings
tab" on page 199).
•
Ethernet Port: You can enable/disable Ethernet port.
•
Ethernet Speed: Choose the speed rate of Ethernet.
•
MAC Address: Shows the Mac address of the machine.
TCP/IP Protocol
You can set IPv4 settings.
Tap
Settings > Network Settings > Ethernet > TCP/IPv4 from the home screen or Apps.
You can also use this feature from the SyncThru™ Web Service. Open the Web browser
from your networked computer and type the IP address of your machine (see "Settings
tab" on page 199).
from your networked computer and type the IP address of your machine (see "Settings
tab" on page 199).
IP Setting
You can choose the method for allocating IP addresses.
•
Static: Select to enter IP address/Subnet Mask/ Gateway Address manually.
•
BOOTP: IP address/Subnet Mask/ Gateway Address are automatically allocated by the BOOTP
Server.
Server.
•
DHCP: IP address/Subnet Mask/ Gateway Address are automatically allocated by the DHCP
Server.
Server.
DNS Configuration
You can configure the DNS server.
•
Host Name: Enter the host name. You can enter up to 63 characters. Default name is “SEC[MAC
address]”.
address]”.
•
Domain Name: Enter the domain name. You can enter up to 128 characters.