Справочник Пользователя для Samsung Digital Display Double Wall Oven
English 47
Tr
ouble
shoo
ting
Problem
Possible cause
Solution
Steam is
coming out of
the vent.
coming out of
the vent.
When using the convection
feature, it is normal to see
steam coming out of the oven
vent.
feature, it is normal to see
steam coming out of the oven
vent.
This is normal operation and
not a system failure.
Use the oven as usual.
not a system failure.
Use the oven as usual.
As the number of racks or
amount of food being cooked
increases, the amount of
visible steam will increase.
amount of food being cooked
increases, the amount of
visible steam will increase.
A burning or
oily odor is
coming from
the vent.
oily odor is
coming from
the vent.
This is normal for a new oven
and will disappear in time.
and will disappear in time.
•
To speed the process, set
a self-cleaning cycle for a
minimum of 3 hours.
a self-cleaning cycle for a
minimum of 3 hours.
•
See the section on self-
cleaning on page 35.
cleaning on page 35.
Strong odor.
An odor coming from the
insulation around the inside
of the oven is normal for the
first few times the oven is
used.
insulation around the inside
of the oven is normal for the
first few times the oven is
used.
Operate the oven empty on
the bake setting at 400 °F for
1 hour.
the bake setting at 400 °F for
1 hour.
Fan noise.
A convection fan may
automatically turn on and off.
automatically turn on and off.
This is not a system failure
but normal operation.
but normal operation.
The oven racks
are difficult to
slide.
are difficult to
slide.
The shiny, silver-colored
racks were cleaned in a self-
cleaning cycle.
racks were cleaned in a self-
cleaning cycle.
Apply a small amount of
vegetable oil to a paper towel,
and then wipe the edges of
the oven racks with the paper
towel.
vegetable oil to a paper towel,
and then wipe the edges of
the oven racks with the paper
towel.
The oven door
is locked.
is locked.
The circuit breaker has been
tripped or there was a power
failure while the oven door
was locked.
tripped or there was a power
failure while the oven door
was locked.
Information codes
OVEN
Displayed
Code
Possible cause
Solution
C-d0
This code occurs if the control key is
short for 1 minute.
short for 1 minute.
Clean the buttons and make
sure there is no water on/
around them. Turn off the
oven and try again. If the
problem continues, contact
a local Samsung service
center.
sure there is no water on/
around them. Turn off the
oven and try again. If the
problem continues, contact
a local Samsung service
center.
C-d1
This code occurs if the door lock is
mispositioned.
mispositioned.
Touch OVEN OFF, and then
restart the oven. If the
problem persists, disconnect
all power to the oven for at
least 30 seconds and then
reconnect the power. If this
does not solve the problem,
call for service.
restart the oven. If the
problem persists, disconnect
all power to the oven for at
least 30 seconds and then
reconnect the power. If this
does not solve the problem,
call for service.
C-F0
This code occurs if communication
between the Main and Sub PBA is
interrupted.
between the Main and Sub PBA is
interrupted.
C-F2
This code occurs if communication
between the Main and Touch is
interrupted.
between the Main and Touch is
interrupted.
C-20
The oven sensor is open when the
oven is operating.
oven is operating.
The oven sensor is short when the
oven is operating.
oven is operating.
NV51K6650DS_DG68-00854A-00_EN+MES+CFR.indb 47
2016-08-16 6:52:26