Справочник Пользователя для Samsung SR8825

34_

 

Maintain tools and fi lter

Maintain tools and fi lter

CLEANING THE ROBOTIC VACUUM CLEANER

CLEANING THE EDGE-CLEANING SIDE ROTATING BRUSH

2.  Wearing rubber gloves, wrap the side rotating brush with 

a cloth using hot water for about 10 seconds and wipe it 
on the cloth.

1.  Check whether the side rotating brush is bent or 

whether there are any foreign substances stuck on the 
brush.

You must turn off the Power Switch at the bottom of the 
main unit before cleaning the robotic vacuum.

3.  Turning the side rotating brush, repeat the procedures 

in Step 2.

4.  If hair or string is wrapped between the main unit and 

the side rotating brush, undo the screw of the side 
rotating brush using a (+) driver to remove it.

     When reassembling the brush, check the “L” mark 

on the edge-cleaning side rotating brush and the “L” 
mark on the main unit and then reassemble the side 
rotating brush. 

    (Letter “R” is carved at the right side rotating brush.)

NOTE

Because the side rotating brush easily attracts hair and other foreign substances, 
make sure to clean it frequently.
Excessive foreign substances on the side rotating brush can damage the brush.

L