Справочник Пользователя для Samsung SR8825
36_
Troubleshooting
Troubleshooting
CHECKLIST BEFORE SVC CALLS
SYMPTOM
CHECKLIST
MEASURE TO TAKE
Robotic vacuum
cleaner does not
operate at all
before
cleaning.
cleaner does not
operate at all
before
cleaning.
•
Is the dust bin assembled?
•
Install the dust bin.
•
Is the Power Switch turned on?
•
Turn on the Power Switch.
•
Is cleaning mode (
) in the
display panel turned on?
•
Press the (
) button. (To turn it
off, press and hold the (
)button
down for 3 seconds or longer.)
•
Is the battery level fl ashing only
one level and is ‘LO’ displayed in
the display panel?
one level and is ‘LO’ displayed in
the display panel?
•
Lift up the robotic vacuum
cleaner, and manually dock the
robotic vacuum onto the charger
to charge it.
cleaner, and manually dock the
robotic vacuum onto the charger
to charge it.
Robotic vacuum
cleaner stopped
operating while
cleaning.
cleaner stopped
operating while
cleaning.
•
Is the battery level fl ashing only
one level and is ‘LO’ displayed in
the display panel?
one level and is ‘LO’ displayed in
the display panel?
•
Lift up the robotic vacuum
cleaner, manually dock the robotic
onto the charger to charge it.
cleaner, manually dock the robotic
onto the charger to charge it.
•
Has the robotic vacuum cleaner
become hooked on wires on the
fl oor?
become hooked on wires on the
fl oor?
•
Turn off the Power Switch and
remove the wires.
remove the wires.
•
Is the robotic vacuum cleaner
stuck to the fl oor where there is a
height difference?
- The driving wheel is lifted.
stuck to the fl oor where there is a
height difference?
- The driving wheel is lifted.
•
Turn off the Power Switch and
move the cleaning robotic
vacuum to another place to clean.
move the cleaning robotic
vacuum to another place to clean.
•
Is there a thin towel (cloth)
wrapped around the driving
wheel?
wrapped around the driving
wheel?
•
Turn off the Power Switch and
remove the thin towel.
remove the thin towel.
•
Is the robotic vacuum cleaner
stuck on the doorsill?
stuck on the doorsill?
•
Turn off the Power Switch and
move the robotic vacuum cleaner
to another place to clean.
move the robotic vacuum cleaner
to another place to clean.
The suction
power is weak
while cleaning.
power is weak
while cleaning.
•
Check whether the dust bin
is full of dust.
is full of dust.
•
Stop the robotic vacuum cleaner
and empty the dust bin.
and empty the dust bin.
•
Check whether the suction
inlet is clogged by foreign
substances.
inlet is clogged by foreign
substances.
•
Turn off the Power Switch and
remove the foreign substances on
the suction inlet.
remove the foreign substances on
the suction inlet.
•
Check whether the Filter is
clogged.
clogged.
•
Clean the Filter well.
Robotic vacuum
cleaner cannot
fi nd the charger.
cleaner cannot
fi nd the charger.
•
Check whether the power
plug of the charger is plugged
correctly into the outlet.
plug of the charger is plugged
correctly into the outlet.
•
If there are any obstacles within a
range of about 1m in front of the
charger and about 0.5m range to
the left and right of the charger,
you should remove the obstacles.
range of about 1m in front of the
charger and about 0.5m range to
the left and right of the charger,
you should remove the obstacles.
•
If there are any foreign
substances on the change pin,
wipe them off with a dry towel.
substances on the change pin,
wipe them off with a dry towel.