Справочник Пользователя для Acer altos r510 mk2
4 Configuring the system
74
14 Install the chassis cover. For instructions, see
“Installing the Chassis
Cover.”
15 Plug all peripheral devices and the AC power cable back into the
server.
Removing a PCI Riser Connector
The PCI riser connector can be replaced if it fails or if a different option
is required. To replace the PCI riser connector, use the following
instructions to remove it, and then follow the instructions under
“
is required. To replace the PCI riser connector, use the following
instructions to remove it, and then follow the instructions under
“
Installing a PCI Riser Connector”
to install a new riser connector.
NOTE: To eliminate the possibility of installing the replacement
connector on the wrong side of the PCI riser assembly, replace one
connector at a time.
connector on the wrong side of the PCI riser assembly, replace one
connector at a time.
1
Observe the safety and ESD precautions at the beginning of this
book. See
book. See
“Safety Information.”
2
Power down the server and unplug all peripheral devices and the
AC power cable.
AC power cable.
3
Remove the chassis cover. For instructions, see
“Removing the
Chassis Cover.”