Справочник Пользователя для Acer altos r510 mk2

 4 Configuring the system

76

Installing and Removing a PCI Add-in 

Card

Installing a PCI Add-in Card

In the slots provided by the PCI riser connector, you can install either 
one or two add-in cards. Use the following instructions to install an 
add-in card.
1

Observe the safety and ESD precautions at the beginning of this 
book. See 

“Safety Information.”

2

Power down the server and unplug all peripheral devices and the 
AC power cable.

3

Remove the chassis cover. For instructions, see “Removing the 
Chassis Cover.” 

4

Pull up on the two latches on the assembly. See letter “A” in the 
figure below.

5

Lift the PCI riser assembly from the chassis.

6

Open the PCI retention clip on the PCI riser card assembly. See 
letter “A” in the figure below.

7

Remove the filler panel at the back of the riser assembly. See letter 
“B” in the figure below.