Справочник Пользователя для Alcatel-Lucent speedtouch 500
319
PPPoE Commands
pppoe ifscan
Scan a PPPoE interface (proto=pppoe) for available Access Concentrator names and Service Names.
Note
Execute the pppoe ifdetach command for this interface before performing a scan on it.
SYNTAX:
EXAMPLE:
RELATED COMMANDS:
pppoe ifscan
intf = <intfname>
[time = <number{0-36000}>]
[time = <number{0-36000}>]
intf
The name of the Routed PPPoE interface to scan.
REQUIRED
time
A number between 0 and 36000 (seconds).
Represents the time to scan for services.
Represents the time to scan for services.
OPTIONAL
=>pppoe iflist
PPPoE1: dest : PPPoE1
PPPoE1: dest : PPPoE1
Retry: 10
QoS
default
encaps
VC-MUX
mode = IP Routing
flags = echo
flags = echo
magic
accomp
restart
mru
addr
route
savepwd
PPPoEOA
trans addr = pat
mru = 1492
route = 0.0.0.0/0 - 0.0.0.0/0 (metric 0)
user name = guest
user name = guest
password = ********
admin state = down
oper state = down
link state = not-connected
LCP: state = initial
retransm = 10
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
=>pppoe ifscan intf=PPPoE1 time=45
Service Name
Access Concentrator
Done !
=>
=>
Configure a PPPoE interface.