Справочник Пользователя для Alcatel-Lucent speedtouch 500

PPPoE Commands

pppoe ifconfig

Configure a PPPoE interface.

Note

The interface to be configured may not be connected at the time of configuration. Execute pppoe ifdetach 
prior to executing the pppoe ifconfig command.

SYNTAX:

pppoe ifconfig

intf = <> 
[dest = <{RELAY|eth0}>] 
[user = <string>]
[password = <password>] 
[acname = <quoted string>]
[servicename = <quoted string>] 
[pcomp = <{off|on}>]
[accomp = <{on|off|negotiate}>] 
[trace = <{off|on}>]
[concentrator = <{off|on}>] 
[auth = <{pap|chap|auto}>]
[restart = <{off|on}>] 
[retryinterval = <number{0-65535}>]
[passive = <{off|on}>] 
[silent = <{off|on}>]
[echo = <{off|on}>] 
[mru = <number{293-8192}>]
[laddr = <ip-address>] 
[raddr = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[format = <{cidr|dotted|none}>] 
[pool = <{none}>]
[savepwd = <{off|on}>] 
[demanddial = <{off|on}>]
[primdns = <ip-address>] 
[secdns = <ip-address>]
[dnsmetric = <number{0-100}>] 
[idle = <number{0-1000000}>]
[idletrigger = <{RxTx|Rx|Tx}>] 
[addrtrans = <{none|pat}>]
[unnumbered = <{off|on}>]

intf

The name of the PPPoE interface to configure.

REQUIRED

dest

The ethernet port to be used for this PPPoE interface 
(e.g. an ETHoA name).

OPTIONAL

user

The user name for remote PAP/CHAP authentication.

OPTIONAL

password

The password for remote PAP/CHAP authentication.

OPTIONAL