Справочник Пользователя для Alcatel-Lucent speedtouch 500
43
ATM Commands
atm oam ccsend
Send CC activate/deactivate to connection.
SYNTAX:
RELATED COMMANDS:
atm oam ccsend
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[span = <{segment|end2end}>]
[action = <{activate|deactivate}>]
[direction = <{source|sink|both}>]
vpi = <number{0-15}>
[vci = <number{0-511}>]
[span = <{segment|end2end}>]
[action = <{activate|deactivate}>]
[direction = <{source|sink|both}>]
port
ATM port number.
Choose between:
Choose between:
•
DSL0
•
DSL1
•
ATM2
•
ATM3
•
AAL5
•
ATM5
Or specify a port number (dsl0 has port number 0, ..., atm5 has port
number 5).
The parameter DSL0 is replaced by the parameter ADSL0 for the
SpeedTouch™570.
number 5).
The parameter DSL0 is replaced by the parameter ADSL0 for the
SpeedTouch™570.
REQUIRED
vpi
A number between 0 and 15.
Represents the Virtual Path Identifier (VPI)
Represents the Virtual Path Identifier (VPI)
REQUIRED
vci
A number between 0 and 511.
Represents the Virtual Channel identifier (VCI).
Use VCI=0, or do not specify for a VP cross-connection.
Represents the Virtual Channel identifier (VCI).
Use VCI=0, or do not specify for a VP cross-connection.
OPTIONAL
span
End2end or segment continuity check
OPTIONAL
action
Enable or disable (default) CC.
OPTIONAL
direction
Indicates the direction of CC activity
Select either:
Select either:
•
source
•
sink
•
both.
If not specified, CC is activated/deactivated for both directions.
OPTIONAL
Configure CC on the connection.