Справочник Пользователя для Alcatel-Lucent speedtouch 500
62
Bridge Commands
bridge ifconfig
Configure a bridge interface.
SYNTAX:
Note
In case of a SpeedTouch™530 device, never change, or delete the usb_bridge interface!
bridge ifconfig
intf = <intfname>
[dest = <string>]
[qos = <string>]
[encaps = <{llc/snap|vcmux}>]
[fcs = <{off|on}>]
[portstate = <{disabled|learning|forwarding}>]
[retry = <number {0-65535}>]
[dest = <string>]
[qos = <string>]
[encaps = <{llc/snap|vcmux}>]
[fcs = <{off|on}>]
[portstate = <{disabled|learning|forwarding}>]
[retry = <number {0-65535}>]
intf
The name of the bridge interface to configure.
REQUIRED
dest
The destination for this interface. Typically a phonebook entry.
This parameter only needs to be specified when an interface has
been created without specified destination.
This parameter only needs to be specified when an interface has
been created without specified destination.
OPTIONAL
qos
The name of the Quality Of Service (QoS) book entry to apply on
this bridge interface.
this bridge interface.
OPTIONAL
encaps
The type of encapsulation to be used for this bridge interface.
Choose between:
Choose between:
•
llc/snap
•
vcmux
OPTIONAL
fcs
Whether or not to include the Ethernet FCS in the packet header on
the WAN side. Choose between:
the WAN side. Choose between:
•
off (default)
•
on
Note
FCS is normally left off.
OPTIONAL
portstate
The bridge portstate for this interface. Choose between:
•
disabled
•
learning
•
forwarding
OPTIONAL
retry
A number between 0 and 65535.
Represents the number of times the SpeedTouch™ retries to set up
a WAN connection before giving up.
By default the retry value is 10.
Represents the number of times the SpeedTouch™ retries to set up
a WAN connection before giving up.
By default the retry value is 10.
OPTIONAL