Справочник Пользователя для Alcatel-Lucent speedtouch 500
64
Bridge Commands
bridge ifdelete
Delete a bridge interface.
SYNTAX:
EXAMPLE:
Note
In case of a SpeedTouch™530 device, never change, or delete the usb_bridge interface!
RELATED COMMANDS:
bridge ifdelete
intf = <intfname>
intf
The name of the interface name to delete.
Browse through the available entries via the ARROW UP and
ARROW DOWN keys.
Browse through the available entries via the ARROW UP and
ARROW DOWN keys.
REQUIRED
=>bridge ifdelete intf=TestBridge
=>bridge iflist
OBC
=>bridge iflist
OBC
:
Internal
Connection State: connected
Connection State: connected
Port: OBC
PortState: forwarding
RX bytes:
75783
frames:
572
TX bytes:
82843610
frames:
341554
dropframes:
0
eth0
:
Internal
Connection State: connected
Connection State: connected
Port: eth0
PortState: forwarding
RX bytes:
156472129 frames:
5903256
TX bytes:
75689
frames:
425
dropframes:
5561702
usb_bridge :
dest : usb_port
Retry : 10
Retry : 10
QoS : default
Encaps : llc/snap
Fcs : off
Connection State: connected
Port: wan2
Port: wan2
PortNr: 4
PortState: forwarding
RX bytes: 0
frames: 0
TX bytes: 0
frames: 0
dropframes: 0
=>
Create a bridged Ethernet interface.
Attach a bridge interface.
Configure a bridge interface.
Detach a bridge interface.
Show current bridge configuration.