Справочник Пользователя для Alcatel-Lucent speedtouch 500
302
PPPoA Commands
EXAMPLE:
RELATED COMMANDS:
srcmsk
The source IP mask.
Depending on the source netmask:
Depending on the source netmask:
•
Everybody is allowed to use this PPPoA connection (dstmsk=0)
•
Only members of the same subnet as the host which opened the
PPPoA connection are allowed to use the PPPoA connection
(dstmsk=1)
PPPoA connection are allowed to use the PPPoA connection
(dstmsk=1)
•
The actual destination mask will be the netmask applicable for the IP
address of the host which opened the PPPoA connection.
address of the host which opened the PPPoA connection.
•
Only the host which opened the PPPoA connection is allowed to
use the PPPoA connection. (dstmsk=32)
use the PPPoA connection. (dstmsk=32)
•
Any valid (contiguous) netmask in case of VLSM.
OPTIONAL
metric
The route metric, i.e. the cost factor of the route.
Practically, the cost is determined by the hop count.
Practically, the cost is determined by the hop count.
OPTIONAL
=>pppoa iflist
pppoa1: dest : pppoa
pppoa1: dest : pppoa
[00:00:00]
Retry : 10
QoS default
encaps VC-MUX
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
trans addr = pat
mru = 1500
route : dst=0.0.0.0/0 - src=10.0.0.0/1 (metric 1)
auth = auto
auth = auto
user = johndoe@ISP
password = ********
admin state = up
oper state = down
link state = retrying
LCP : state = starting
retransm = 1
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
=>pppoa rtadd intf=pppoa1 dst=172.16.0.5 dstmsk=24 src=10.0.0.2 srcmask=24
=>pppoa iflist
pppoa1: dest : pppoa
=>pppoa iflist
pppoa1: dest : pppoa
[00:00:00]
Retry : 10
QoS default
encaps VC-MUX
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
trans addr = pat
mru = 1500
route = 10.0.0.2/24 - 172.16.0.5/24 (metric 1)
auth = auto
auth = auto
user = johndoe@ISP
password = ********
admin state = up
oper state = down
link state = retrying
LCP : state = starting
retransm = 1
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
=>
Delete the route specification for an upcoming PPPoA link.