Справочник Пользователя для Alcatel-Lucent ap70
AP Deployment
27
Chapter 3
Using the Optional Mounting Kits
Use the optional mounting kit to attach the OmniAccess OAW-AP70 to a wall,
shelf, or ceiling. For installation, see the Alcatel AP70 Mounting Kit Installation
Notes (P/N 031642-00) provided with each kit.
shelf, or ceiling. For installation, see the Alcatel AP70 Mounting Kit Installation
Notes (P/N 031642-00) provided with each kit.
Connecting Required Cables
The OmniAccess OAW-AP70 Access Points with or without external antennas
are intended only for installation in Environment A as defined in IEEE 802.3.af.
All interconnected equipment must be contained within the same building,
including the interconnected equipment's associated LAN connections.
are intended only for installation in Environment A as defined in IEEE 802.3.af.
All interconnected equipment must be contained within the same building,
including the interconnected equipment's associated LAN connections.
Selecting an FE Cable
The 10/100 Mbps Ethernet (FE) port is used to connect the AP to a
10Base-T/100Base-TX (twisted-pair) Ethernet LAN segment. The appropriate
FE cable depends on the features required of the FE port:
10Base-T/100Base-TX (twisted-pair) Ethernet LAN segment. The appropriate
FE cable depends on the features required of the FE port:
z
SPOE
When connecting the AP to a device that supports Serial and Power Over
Ethernet (SPOE), use an 8-conductor, Category 5 UTP, straight-through FE
cable.
Ethernet (SPOE), use an 8-conductor, Category 5 UTP, straight-through FE
cable.
The Alcatel 6000 (with Line Card OAW-LC-2G24FP), the Alcatel 2400, and the
Alcatel 800 support SPOE.
Alcatel 800 support SPOE.
z
POE
If the connecting device supports only Power Over Ethernet (POE), use a 4- or
8-conductor, Category 5 UTP, straight-through FE cable.
8-conductor, Category 5 UTP, straight-through FE cable.
z
Network Only
If the connecting device does not support POE, use a 4- or 8-conductor,
Category 5 UTP, FE cable. The port detects MDI/MDX and automatically adjusts
for straight-through or crossover cables.
Category 5 UTP, FE cable. The port detects MDI/MDX and automatically adjusts
for straight-through or crossover cables.
The maximum length for FE cables is 100 meters (325 feet).
When the OmniAccess OAW-AP70 is installed in an air-handling space, such
as above suspended ceilings, as described in National Electrical Code (2002)
Article 300.22(C), and Canadian Electrical Code, Sections 2-128, 12-010(3)
and 12-100, Part 1, CSA C22.1, POE is required. Also, any FE cable installed in
such spaces should be suitable under NEC Article 800.50 and marked
accordingly for use in plenums and air-handling spaces with regard to smoke
propagation, such as CL2-P, CL3-P, MPP, or CMP.
as above suspended ceilings, as described in National Electrical Code (2002)
Article 300.22(C), and Canadian Electrical Code, Sections 2-128, 12-010(3)
and 12-100, Part 1, CSA C22.1, POE is required. Also, any FE cable installed in
such spaces should be suitable under NEC Article 800.50 and marked
accordingly for use in plenums and air-handling spaces with regard to smoke
propagation, such as CL2-P, CL3-P, MPP, or CMP.