Справочник Пользователя для Alcatel-Lucent ap70

Part 031644-00

May 2005

Use the built-in antenna or use Alcatel AP-ANT-1. For all other antennas, make 
sure the antenna cable is UL listed and suitable for use in plenums and 
air-handling spaces, such as CL2-P, CL3-P, MPP, or CMP, and mount the 
antenna outside of the air-handling space.

Install cables in accordance with all applicable local and national regulations 
and practices.

For more port and cable details, see 

1 Connect one end of the FE cable directly to the OmniAccess 

OAW-AP70 FE port.

2 Connect the other end of the FE cable to one of the following:

To a network port on the Alcatel Wireless LAN Switch, or

To a network hub, router, or switch that has a routable path to the Alcatel Wireless 
LAN Switch.

If the connecting device supplies POE, a straight-through cable must connect the OmniAccess 

OAW-AP70 directly to the powering device without any intervening hubs, routers, or other networking 
equipment.

3 Connect power, if necessary.

The OmniAccess OAW-AP70 can receive electrical power using the following 
options:

z

POE

If connecting the OmniAccess OAW-AP70 to a device that supplies IEEE 
802.3af compliant POE no additional power connection is necessary.

z

Power Outlet

—When the OmniAccess OAW-AP70 is installed in an air-handling space, as 

described in NEC (2002) Article 300.22(C), POE must be used instead of a power 
outlet.

To prevent personal injury or damage to equipment, be sure to comply with 

electrical grounding standards during all phases of installation and operation of the AP. Do 
not allow the OmniAccess OAW-AP70 or its attachments to be connected to or make contact 
with metal or power outlets on a different electrical ground than the device to which it is 
connected. Also, never connect the AP or Wireless LAN Switch to external storm grounding 
sources.