Справочник Пользователя для Alcatel-Lucent OmniAccess 3500
Chapter 2. Initialization Tasks
Figure 7 - Edit Gateway Support Information
Logging Out of the Management System GUI
1. To log out of the management system GUI, click the Logout link near the top of
the window (see Figure 8 for the location of the Logout link).
2. Alternatively, you can exit the application by closing the web browser window.
Figure 8 - Logout button
Initial Configuration of Gateway Parameters
After physical installation of the OmniAccess 3500 NLG gateway or installation of a
software upgrade, you must configure the gateway for interoperation with the other
nodes of your network. This section describes the procedure for this initial
configuration.
1. The first time the management system GUI is opened, the Gateway Settings
software upgrade, you must configure the gateway for interoperation with the other
nodes of your network. This section describes the procedure for this initial
configuration.
1. The first time the management system GUI is opened, the Gateway Settings
window appears (Figure 9). Click New.
11