Справочник Пользователя для Alcatel-Lucent speedtouch 180
1 SpeedTouch™180 Installation
E-DOC-CTC-20040401-0003 v2.0
12
1.3.2 The SpeedTouch™180 as Wireless Client
Operation mode
selection
Proceed as follows:
1
Open your web browser and go to
http://10.0.0.140
.
2
Enter “admin” in the Password box and click LOGIN to access the management
interface.
interface.
3
On the System menu, click Operating Mode.
4
Select Client Bridge (Infrastructure) and click Apply.
5
Your SpeedTouch™180 restarts.
Wireless settings
configuration
Once your SpeedTouch™ has restarted, configure your SpeedTouch™180 with the
appropriate wireless settings:
appropriate wireless settings:
1
If needed, open your web browser and go to
http://10.0.0.140
.
2
Enter “admin” in the Password box and click LOGIN to access the management
interface.
interface.
3
On the Wireless menu, click Basic Settings.
4
Configure the SpeedTouch™180 with the same SSID as your Access Point and
click Apply.
click Apply.
5
On the Wireless menu, click WEP Configuration
6
Configure the SpeedTouch™180 with the same WEP key as your Access Point
and click Apply.
and click Apply.
Note
WPA is not available in this mode.
Network configuration
To complete the configuration:
1
Configure your Ethernet interface for obtaining an IP configuration dynamically.
Note
For more information, please consult the Operating System’s Help.
2
If needed, connect the SpeedTouch™ to your computer or gaming device using
the Ethernet cable provided with your SpeedTouch™180.
the Ethernet cable provided with your SpeedTouch™180.