Справочник Пользователя для ASUS rx3041h

•  Enter Subnet Mask for the WAN. This information should be provided by your ISP. 

Typically, it is 255.255.255.0. 

•  Enter gateway address provided by your ISP in the space provided. 
•  Enter at lease the primary DNS IP address provided by your ISP. Secondary DNS IP 

address is optional. Enter it in the space provided if you have such information from your 
ISP. 

•  Click 

 to save the static IP settings 

You have now completed customizing basic configuration settings. Read the following section to determine if 
you have access to the Internet. 

At this point, the RX3041H should enable any computer on your LAN to use the RX3041H’s ADSL or cable 
modem connection to access the Internet. 

To test the Internet connection, open your web browser, and type the URL of any external website (such as 

). The LED labeled WAN should be blinking rapidly and may appear solid as the 

device

 

connects to the site. You should also be able to browse the web site through your web browser. 

If the LEDs do not illuminate as expected or the web page does not display, see Appendix D for 
troubleshooting suggestions. 

In addition to handling the DSL connection to your ISP, the router provides a variety of services to your 
network. The device is pre-configured with default settings for use with a typical home or small office network. 

Table 3.2 lists some of the most important default settings; these and other features are described fully in the 
subsequent chapters. For a complete list of default settings, please refer to the section B.2 “Default Settings”. If 
you are familiar with network configuration settings, review the settings in Table 3.2 to verify that they meet the 
needs of your network. Follow the instructions to change them if necessary. If you are unfamiliar with these 
settings, try using the device without modification. 

Before modifying any settings, review Chapter 4 for general information about accessing and using the 
Configuration Manager. 

DHCP server enabled with the 
following pool of addresses:  

192.168.1.10 through 192.168.1.200

The router maintains a pool of private IP 
addresses for dynamic assignment to your 
LAN computers. To use this service, you 
must have set up your computers to 
accept IP information dynamically, as 
described in Part 2 of the Quick Start 
Guide. See section 5.2 for an explanation 
of the DHCP service. 

Static IP address: 192.168.1.1 

subnet mask: 255.255.255.0 

This is the IP address of the LAN port on 
the RX3041H. The LAN port connects the 
device to your Ethernet network. Typically, 
you will not need to change this address. 
See section 5.1 LAN IP Address for 
instructions.