Справочник Пользователя для ASUS rx3041h

79 

Select this type of NAT to specify the Dynamic Interface whose IP address should be used for 
subjecting traffic to NAT. 

To add a NAT Pool, follow the instructions below: 

1.  Open the NAT Pool configuration page by clicking the Firewall 

Π

Policy List 

ΠNAT Pool menu. 

2. Select 

“Add New Pool” from the NAT Pool drop-down list. 

3.  Enter a pool name into the Name field. 

4.  Select a pool type from the Type drop-down list.  

5.  If “Static” or “Dynamic” pool type is selected, enter the original IP 

addresses (start IP Address, and end IP Address), and mapped IP addresses (start NAT IP 
Address and end NAT IP Address). If “Overload” pool type is selected, enter the NAT IP address. 
If you want to use the IP address assigned for the WAN port as the NAT IP address, select the 
Interface pool type. 

 

6.  Click on the 

 button to create the new NAT pool. The new NAT pool will then be displayed 

in the NAT Pool List table. 

 

To modify a NAT Pool, follow the instructions below: 

1.  Open the NAT Pool configuration page by clicking the Firewall 

ΠPolicy List Î NAT Pool 

menu. 

2.  Click on the 

 icon of the NAT pool to be modified in the NAT Pool List table or select the NAT 

pool from the NAT Pool drop-down list. 

3.  Make desired changes to any or all of the following fields: Pool name, Pool type and IP address.