Справочник Пользователя для ASUS rx3041h
RX3041H User’s Manual
Chapter 9. Configuring Firewall/NAT Settings
81
2. Associate the NAT pool to an outbound ACL rule by selecting “NAT Pool” from the NAT type
drop-down list and then choose an existing NAT pool from the NAT pool drop-down list.
Figure 9.33. NAT Pool Example – Associate a NAT Pool to an ACL Rule
9.8.4
Configuring Time Range
With this option you can configure access time range records for eventual association with ACL rules. ACL
rules associated with a time range record will be active only during the scheduled period. If the ACL rule
denies HTTP access during 10:00hrs to 18:00hrs, then before 10:00hrs and after 18:00hrs the HTTP traffic will
be permitted to pass through. One time range record can contain up to three time periods. For example:
rules associated with a time range record will be active only during the scheduled period. If the ACL rule
denies HTTP access during 10:00hrs to 18:00hrs, then before 10:00hrs and after 18:00hrs the HTTP traffic will
be permitted to pass through. One time range record can contain up to three time periods. For example:
Office hours on weekdays (Mon-Fri) can have the following periods:
Pre-lunch period between 9:00 and 13:00 Hrs
Post-lunch period between 14:00 and 18:30 Hrs
Post-lunch period between 14:00 and 18:30 Hrs
Office hours on weekends (Saturday-Sunday) can have the following periods:
9:00 to 12:00 Hrs
Such varying time periods can be configured into a single time range record. Access rules can be activated
based on these time periods.
based on these time periods.
9.8.4.1
Time Range Configuration Parameters
Table 9.9 describes the configuration parameters available for a time range.
Table 9.9. Time Range Configuration Parameters
Field
Description
Time Range drop-
down list
down list
Select "Add New Time Range" to add a new time range or select an existing
time range from the drop-down list.
time range from the drop-down list.
Time Range Name
Enter a name for the Time Range.
Schedule drop-down
list
list
Select "Add New Schedule" to add a new schedule or select an existing
schedule from the drop-down list.
schedule from the drop-down list.
Days of Week
Set the days for the schedule.
Time (hh:mm)
Set the time windows for the schedule in hh:mm format.
NAT pool drop-down list
NAT type drop-down list