Справочник Пользователя для ati all-in-wonder x800
16 Detailed Installation
8
Connect the power extension cable to the 4-pin power connection on
the graphics card.
the graphics card.
9
Connect the power extension cable to the power supply .
10
Connect the power extension cable to the hard drive.
11
Screw in or fasten the graphics card securely. Make sure the cables
are not interfering with anything inside the computer (for example, a
cooling fan) and replace the computer cover.
are not interfering with anything inside the computer (for example, a
cooling fan) and replace the computer cover.
12
Reconnect any cables you have disconnected and plug in the
computer’s power cord.
computer’s power cord.
Note: Before turning your computer on again, connect the
appropriate display devices.
appropriate display devices.
Connecting Display Devices
The following connections are available:
• VGA — for standard VGA monitors
• DVI-I — for digital flat-panel displays
You can connect an analog CRT display using an optional DVI-I-to-VGA
adapter, as shown below.
adapter, as shown below.
Turning on the System
If you have properly installed your graphics card, operating system
messages will appear once the boot procedure is finished.
messages will appear once the boot procedure is finished.
L
WARNING
- Turn on your monitor before you turn on your
computer. Failure to do so could damage your monitor.
DVI-I
CONNECTOR
VGA
CONNECTOR
ON CARD
FROM
MONITOR
DVI-I-TO
VGA
ADAPTER