Справочник Пользователя для ati all-in-wonder x800

Detailed Installation 15

Turn off the computer, monitor, and other peripheral devices.

Unplug the computer’s power cord and disconnect all cables from the 
back of your computer.

Remove the computer cover. 

If necessary, consult your computer’s manual for help in removing the 
cover.

Unscrew or unfasten and remove any existing graphics card from 
your computer.

Note: If your computer has an on-board graphics capability, you may 
need to disable it on the motherboard. For more information, see your 
computer documentation.

Locate the appropriate slot and, if necessary, remove the metal back-
plate cover. 

Align your ATI graphics card with the slot and press it in firmly until 
the card is fully seated. 

Remove the power cable from the hard drive power connector.

^

Power Extension Cable: Power Connector to Hard Drive

_

Power Extension Cable: Power Connector to Power Supply

`

Hard Drive

a

Power Connector to Hard Drive

L

 - Wait approximately 20 seconds after unplugging the 

power cord before disconnecting a peripheral or removing a 
component from the motherboard to avoid possible damage to the 
motherboard. 

L

 - Remember to discharge your body’s static electricity by 

touching the power supply or the metal surface of the computer 
chassis.