Справочник Пользователя для 3com 2000 TR

C

HAPTER

 4: A

CCESSING

 M

ANAGEMENT

 F

EATURES

Connect your terminal to the Console port on the 
rear panel of the Switch 2000 TR using a cross-over 
cable for a serial line connection. Refer to the Switch 
2000 TR User Guide for more information.

The Console port automatically detects the line-speed 
(baud rate), and uses the following default settings:

■

auto-baud 

■

8 character size (data bits)

■

1 stop bit

■

no parity

Character size, stop bit, flow control, and parity 
values cannot be changed. 

Press [Return] two or more times until the Switch 
2000 Main Banner appears (shown in Figure 4-3). 

Figure 4-3   Main Banner

If your terminal is already set up with these values, 
the Main Banner appears as soon as power-up is 
complete.

Press [Return] to display the Logon screen at the Main 
Banner.

Type in your user name and password. Note that they 
are both case-sensitive:

■

If you are logging on for the first time (after instal-
lation or initialization), use a default user name 
and password to match your access requirements. 
We recommend that you use the default user 
“securityÓ so that you can access all functions. 
The defaults are shown in Table 4-3.

■

If you have been assigned a user name, access 
level and password, type in these details.

Table 4-3   Default Users

monitor

monitor

monitor - this user can view, but 
not change all manageable 
parameters

manager

manager

manager - this user can access 
and change the operational 
parameters but not special/secu-
rity features

security

security

security - this user can access 
and change all manageable 
parameters