Справочник Пользователя для Archos 704 tv
MANUAL
V1.1
optIoNAL fUNCtIoNALItIES > p. 54
Test channel select
When you tap on the
Test channel select
button, the ARCHOS device will send a signal through the DVR
Station’s infrared emitter and change the channel on your tuner (VCR, cable box, or satellite receiver).
If the Number of digits parameter is set to three, it will try to select channel 123. If that parameter is set to 2,
If the Number of digits parameter is set to three, it will try to select channel 123. If that parameter is set to 2,
it will send the code for channel 12. If your tuner does not change channels when you tap on this test button,
try the next code for your device: see Tune device
Code
(multiple codes available).
-
-
Key: -/--
Set this to
On
if normally, you have to press this same key on your device’s remote control in order to select a
channel.
-
Number of digits
Set the number of digits that your device can recognize for a channel. Example: Set to 3 if you need to choose
a channel greater than channel 99.
-
Key: Enter
Set this to
On
if normally, you have to press the
OK
button on your device’s remote control after you enter
the channel number. Example: If you normally press 1, 3,
OK
for channel 13, then you would need to set this
parameter to
On
.
-
Key Delay
Change the delay between the emission of each digit of a channel. You may need to adjust this if the ARCHOS
device seems to send only half the digits of a channel or more digits of a channel. Example: Adjust the key
delay and retest channel select if it sends channel 2 instead of 12 or sends 112 instead of 12.
-
These last four parameters (
Tune channel select) usually do not need to be set. Keep the default values to start
with.
8.6 reCOrdIng audIO (exTernal sOurCe)
You can record audio from an external line-level analog source if you use the optional DVR Station
or DVR Travel Adapter.
In the Home Screen, tap on the
In the Home Screen, tap on the
AudioCorder
icon to highlight it, then tap again on it to display
the pre-recording screen.
All audio recordings made by your ARCHOS device are saved in the
Music/(Rec) folder. If you wish to keep
them in a different location, you can use the
Move menu item of the ARCHOS file browser after recording
(see: Using the Browser).
The icon
The icon
appears in the status bar while recording.
Audio files recorded by your ARCHOS device will be tagged as follows: Artist = (Archos: Audio Recordings),
Album = (Rec).
•
•
•
•
AUdIoCoRdER SEttINGS SCREEN
You can access the
AudioCorder
Settings screen
via the
Settings
menu item.
This screen allows you to adjust audio input set-
tings for your recordings.
Tap on the / buttons to select a different
Tap on the / buttons to select a different
setting for a parameter.
•
•
•