Справочник Пользователя для Archos dvr station gen 5

 DVR Station Gen 5

4

3.4. COnfiguring THe TV COnTrOl seTTings

Your ARCHOS needs to be connected to the DVR Station. You also need to have connected your tuner to 
the DVR Station (see: 

on the Connection Guide sheet).

From the ARCHOS Home Screen, select 
the “

” 

 menu item, and 

choose “

” to display the “

” settings screen.

This settings screen allows you to set 
the DVR Station’s IR emitter as well as 
configure the channel list.

•

•

From the “

” screen, select “

”.

Verify that the channel list on the ARCHOS is the same as on your tuner.

Here you can deselect/select a channel or change the number of a channel. 

The DVR Station has a high-powered infrared LED, located 
on the front of the device, at the same place as the infrared 
receiver (see: 

How to Use the Remote Control). 

It allows your ARCHOS device to communicate with your 
tuner (VCR, cable box, satellite receiver or Digital TV re-
ceiver), so that it can turn it on and off, and change channels 
on it.

•

•

This is a one time step to set your ARCHOS device to send the correct infrared codes 
to control your tuner. If you do not plan on making scheduled recordings, then you do 
not need to set the infrared emitter code. 

From the “

” screen, select “

”. This first screen allows 

you to correctly set the codes and parameters so that the DVR Station can turn your 
tuner on/off automatically (for a scheduled recording).

1.

2.

3.

•

1.