Справочник Пользователя для HP proliant ml370
Removal and replacement procedures 43
To replace the component, reverse the removal procedure.
Media blanks
To remove the component:
1.
Power down the server (on page
2.
Open or remove the tower bezel ("
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
3.
Remove the media blanks.
NOTE: HP recommends that you remove all media blanks to facilitate drive installation.
Retain the blanks for future use.
To replace the component, reverse the removal procedure.
Half-height or full-height media devices
To remove the component:
1.
Power down the server (on page
2.
Do one of the following:
•
Unlock and remove the bezel ("
•
Extend the server from the rack (on page
3.
Remove the access panel ("