HP proliant ml370 Manual De Usuario

Removal and replacement procedures  43 

To replace the component, reverse the removal procedure. 

 

Media blanks 

To remove the component: 

Power down the server (on page 

Open or remove the tower bezel ("

  CAUTION:  To prevent improper cooling and thermal damage, do not operate the server unless all bays 

are populated with either a component or a blank.  

Remove the media blanks. 

 

  NOTE:  HP recommends that you remove all media blanks to facilitate drive installation. 

Retain the blanks for future use. 

To replace the component, reverse the removal procedure. 

 

Half-height or full-height media devices 

To remove the component: 

Power down the server (on page 

Do one of the following: 

•

Unlock and remove the bezel ("

•

Extend the server from the rack (on page 

Remove the access panel ("