Справочник Пользователя для HP proliant bl e-class

 

IMPORTANT:  User name and password are case-sensitive. 

4.  Determine the Integrated Administrator IP address using one of the following methods: 

 

NOTE:  For more information, such as determining the Integrated Administrator IP address using 
the Web-based user interface, refer to the HP ProLiant BL e-Class Integrated Administrator User 
Guide on the Documentation CD provided with your server blade enclosure. 

a.  If a DHCP server is attached to the network, type the following at the command line 

to determine the Integrated Administrator IP address: 

b.  If a DHCP server is not attached to the network, then type the following commands 

to assign a static IP address to the Integrated Administrator: 

You may now access the Integrated Administrator module through a Web browser, 
Secure Shell, Telnet, or SNMP connection. 

5.  Perform the following tasks as soon as the Integrated Administrator IP address is 

assigned: 

a.  Reset the administrator password 

b.  Set the day, date, and time 

c.  Name the server blade enclosure and rack 

d.  Set up groups, users, and access privileges 

After your ProLiant e-Class C-GbE Interconnect Switch is installed and cabled and the 
Integrated Administrator is configured, you can access and configure the switch modules 
through the Integrated Administrator software. 

1.  Access the switch modules from the Integrated Administrator command line interface 

using one of the following methods: 

a.  If you have already logged into the Integrated Administrator as the “Administrator,” 

you can connect to either switch module console using one of the following 
commands: 

 

to access Switch A

 

or 

 

to access Switch B