Справочник Пользователя для HP proliant bl e-class

b. If 

you 

have 

not logged on to the Integrated Administrator, you can use one of two 

special logon accounts to access the switch module consoles directly, depending on 
whether you want to access Switch A or Switch B. At the login prompt type in both 
the user name and password as either: 

or 

The logon screen for Switch A or Switch B will now be displayed. 

 

2.  Perform the following tasks for each switch module: 

a.  Configure the IP address 

b.  Set up users, passwords, and access privileges 

c.  Change default SNMP community strings for read/write and read-only 

 

NOTE:  After configuring the IP address on the switch module, the switch module can be accessed 
using Telnet, SNMP, or a Web browser.   

Refer to the command line interface and menu-driven interface reference guides for 
information on how to use the command line management interface and the menu-driven 
interface to change configuration settings and monitor switch operation using one of the 
following interfaces: 

• 
• 

Local Serial RS-232 Console Management Interface through Integrated Administrator 

Remote Telnet Console Management Interface 

Refer to the Web-based interface reference guide for information on how to use the 
embedded Web-based (HTML) interface to manage the interconnect switch from anywhere 
on the network using a standard browser, such as Netscape Navigator or Microsoft Internet 
Explorer. 

Appendix E of this guide provides information regarding the SNMP and RMON Agents 
along with the MIBs supported. This appendix also discusses how to use these MIBs to 
configure and monitor the switch modules using a generic SNMP manager.