Справочник Пользователя для Canon imageclass d1170 multifunction printer 3478b018aa
12-18
Troubleshooting
Error Codes (D1180/D1170/D1150)
Error Codes (D1180/D1170/D1150)
An error code is a four-digit code shown on an ERROR TX REPORT or an RX ERROR REPORT
when an error occurs.
when an error occurs.
For details on reports, see “Summary of Reports and Lists,” in the e-Manual.
See the table below for individual error codes.
Error Code
Description
Action
0001
A document may be jammed.
0003
An attempt was made to send a document of
24 7/8" (630 mm) or longer from the ADF.
24 7/8" (630 mm) or longer from the ADF.
–
Divide the document into smaller parts and
send from the platen glass.
send from the platen glass.
–
A document takes a long time to send
because it contains too much data.
because it contains too much data.
–
Reduce the scanning resolution before
sending.
sending.
–
A document takes a long time to receive.
–
Contact the other party and ask them to
reduce their scanning resolution or divide the
document into smaller parts for sending.
reduce their scanning resolution or divide the
document into smaller parts for sending.
–
0005
The other fax machine did not respond within
35 seconds.
35 seconds.
–
Send the document again. Contact the other
party and have them check their fax machine.
If you are making an overseas call, add a
pause to the number.
party and have them check their fax machine.
If you are making an overseas call, add a
pause to the number.
–
The other party may not be using a G3 fax
machine.
machine.
–
Check with the other party and send the
document to a G3 fax machine. If the other
party does not have a G3 fax machine, try
sending your document using a transmission
mode the other party’s fax machine supports.
document to a G3 fax machine. If the other
party does not have a G3 fax machine, try
sending your document using a transmission
mode the other party’s fax machine supports.
–