Справочник Пользователя для Canon imageclass mf6560
1
2
3
4
5
6
7
8
Back
3-17
6.
Use [
] or [
] to select <ON> or <OFF>,
then press [OK].
<ON>: Uses LPD as the print application.
<OFF>: Does not use LPD. Skip to step 8.
<OFF>: Does not use LPD. Skip to step 8.
7.
Use the numeric keys to enter the port
number, then press [OK].
number, then press [OK].
8.
Confirm that <RAW SETTINGS> is displayed,
then press [OK].
then press [OK].
9.
Use [
] or [
] to select <ON> or <OFF>,
then press [OK].
<ON>: Uses Raw as the print application.
<OFF>: Does not use Raw. Skip to step 14.
<OFF>: Does not use Raw. Skip to step 14.
10.
Confirm that <PORT NO.> is displayed, then
press [OK].
press [OK].
11.
Use the numeric keys to enter the port
number, then press [OK].
number, then press [OK].
12.
Confirm that <USE BIDIRECTIONAL> is
displayed, then press [OK].
displayed, then press [OK].
13.
Use [
] or [
] to select <ON>, then press
[OK].
14.
Use [
] or [
] to select <SET IP ADD
RANGE>, then press [OK].
15.
Use [
] or [
] to select <ON>, then press
[OK].
16.
Confirm that <PERMIT/REJECT> is
displayed, then press [OK].
displayed, then press [OK].
17.
Use [
] or [
] to select <REJECT> or
<PERMIT>, then press [OK].
<PERMIT>: Permits the IP addresses of computers from which
data (print/fax job) can be sent to the machine.
<REJECT>: Restricts the IP addresses of computers from which
data (print/fax job) can be sent to the machine.
data (print/fax job) can be sent to the machine.
<REJECT>: Restricts the IP addresses of computers from which
data (print/fax job) can be sent to the machine.
18.
Confirm that <SET IP ADDRESS> is
displayed, then press [OK].
displayed, then press [OK].