Справочник Пользователя для Canon pixma ip4300

Страница из 102
69
Troubleshooting
Printer Does Not Start
Cause
Action
Ink tank is empty.
Open the Top Cover and check the ink lamps.
If an ink lamp is either flashing red at about 1-second intervals or is not lit, the 
tank is empty. 
Replace the ink tank, and close the Top Cover.
See “Replacing an Ink Tank” on page 26.
To continue printing, confirm the number of times the ALARM lamp is flashing 
and take the appropriate action. See “ALARM Lamp Flashes Orange” on 
page 76.
Note
If multiple ink lamps are flashing, check how fast they are flashing. 
Fast flashing (at about 1-second intervals) indicates the tank is empty. Slow 
flashing (at about 3-second intervals) indicates ink is low. For details on different 
flashing speeds, see “Replacing an Ink Tank” on page 26.
Ink tank not installed in proper position. Open the Top Cover and check the ink lamps.
If there is still sufficient ink but its ink lamp is flashing red, an ink tank may be 
installed in a wrong position.
Confirm that the ink tanks are installed in the appropriate positions. See 
“Replacing an Ink Tank” on page 26.
Ink tank is not installed securely. / Part 
of the orange tape is remaining.
Open the Top Cover and check the ink lamps.
If the ink lamp is not lit, press the 
 mark on the ink tank until it clicks into 
place. The ink lamp lights up red when the ink tank is fully inserted.
Make sure all of the orange tape is peeled off the ink tank and the air hole is 
completely exposed, as illustrated in (A). If any orange parts are left as in (B), 
remove all of the orange parts.
(A) Correct
L-shaped air hole
(B) Incorrect
Part of the orange tape is remaining. Peel off the tape completely along the 
perforation.
(B)
(A)
downloadlike
ArtboardArtboardArtboard
Сообщить об ошибке