Справочник Пользователя для Samsung iDCS 100

12

11

MM (Minutes): Enter a number in the range of 00–59.

Failure to enter the time using the 24 hour clock will cause the date to
change at 12:00 P.M. Open customer programming and follow the instruc-
tions below.

1. Press TRSF and then dial 505

Display shows

2. Enter the new time and date using 

the above format

3. Verify the time and date and reenter 

them if necessary

4. Press TRSF to store and exit 

programming OR press SPK to store 
and advance to the next program

If you have entered invalid data, you will receive an [ INVALID ENTRY ] mes-
sage for three seconds. Reenter the correct date and time. If the information
you entered is incorrect, repeat the procedure.

Individual keyset users can set or change their own individual passcodes.
These passcodes are used to lock and unlock keysets, override toll restric-
tion and access the DISA feature. At times, it may be necessary for the sys-
tem administrator to reset a station’s passcode to default “1234.” This pro-
gram cannot be used to display passcodes, only to reset them.

UP & DOWN - Select the extension number.
HOLD - Press to reset the passcode.

Open customer programming and follow the instructions below.

1. Press TRSF and then dial 101

Display shows

PASSCODE:✱✱✱✱

You can change individual feature passcodes. This program is used to
change the passcodes for several features. These features are the following:
RING PLAN SERVICE, DISA ALARM, ALARM CLEAR, and AA RECORD.
Note: Each passcode is four digits long. Each digit can be 0 to 9.

UP & DOWN - Select the extension number.
HOLD - Press to reset the passcode to default settings.

Open customer programming and follow the instructions below.

1. Press TRSF and then dial 202

Display shows

2. Use the UP and DOWN keys to scroll

through the different options and press

the right soft keys.

3. Press HOLD to reset the passcode

4. Press TRSF to store and exit programming

OR press SPK to store and advance to the
next program

Should it ever become necessary to correct the date and time displayed on
all of the keysets, do so as soon as you notice that they are incorrect. Auto-
matic Operating Mode will not work correctly and SMDR records will be of
no value when the date and time are not correct.

The display format is the following:

W (Day of the week): Enter 0 for Sunday and 6 for Saturday.
MM (Month): Enter 01 for January and 12 for December.
DD (Day of the month): Enter a number in the range of 01–31.
YY (Year): Enter the last two digits of the year.
HH (Hours): Use the 24 hour clock and enter a number in the range of
00–24.