Справочник Пользователя для Sony DVP-NS3100ES
76
• SUBWOOFER
Notes
• If your speakers are too small to reproduce low
bass frequencies, utilize a subwoofer for low
frequency sound. When you set the speaker
settings to “SMALL,” the bass redirection
circuitry will be activated and the bass
frequencies for the speakers are output from the
subwoofer.
frequency sound. When you set the speaker
settings to “SMALL,” the bass redirection
circuitry will be activated and the bass
frequencies for the speakers are output from the
subwoofer.
• Even if there are fewer than 6 speakers connected,
the player distributes the audio signal components
to the front speakers.
to the front speakers.
• When you set the front speaker setting to
“SMALL,” you cannot set the center and rear
speaker settings to “LARGE,” and the subwoofer
setting to “NONE.”
speaker settings to “LARGE,” and the subwoofer
setting to “NONE.”
◆ DISTANCE
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
“FRONT” first (A). Then adjust the values in
“CENTER” (center speaker B), “REAR”
(rear speaker C), and “SUBWOOFER” (D)
to reflect the actual distance to your center
speaker, rear speakers, and subwoofer.
to the speakers.
Set the distance to your front speakers in
“FRONT” first (A). Then adjust the values in
“CENTER” (center speaker B), “REAR”
(rear speaker C), and “SUBWOOFER” (D)
to reflect the actual distance to your center
speaker, rear speakers, and subwoofer.
Be sure to change the value in the Setup
Display each time you move the speakers.
Start from the front speaker. The default
adjustments are in parentheses.
Display each time you move the speakers.
Start from the front speaker. The default
adjustments are in parentheses.
Notes
• If each of the front or rear speakers are not placed
at an equal distance from your listening position,
set the distance according to the closest speaker.
set the distance according to the closest speaker.
• The minimum distance is 1 foot.
◆ LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
YES
Select this if you connect a
subwoofer to output the LFE
(low frequency effect) signals
from the subwoofer.
subwoofer to output the LFE
(low frequency effect) signals
from the subwoofer.
NONE
Select this if you do not connect
a subwoofer.
a subwoofer.
B
D
A
A
C
C
(1~30 ft)
(1~30 ft)
FRONT
(10 ft)
(10 ft)
Set this between 1 and 30
feet in 1 foot increments.
feet in 1 foot increments.
CENTER (10 ft) Set this within –5 feet of the
“FRONT” setting in 1 foot
increments. For example, if
“FRONT” is set to 20 feet,
“CENTER” can be set
between 15 and 20 feet.
increments. For example, if
“FRONT” is set to 20 feet,
“CENTER” can be set
between 15 and 20 feet.
REAR (10 ft)
Set this within –15 feet of
the “FRONT” setting in 1
foot increments. For
example, if “FRONT” is set
to 20 feet, “REAR” can be
set between 5 and 20 feet.
the “FRONT” setting in 1
foot increments. For
example, if “FRONT” is set
to 20 feet, “REAR” can be
set between 5 and 20 feet.
SUB WOOFER
(10 ft)
(10 ft)
Set this within –15 feet of
the “FRONT” setting in 1
foot increments. For
example, if “FRONT” is set
to 20 feet, “SUB
WOOFER” can be set
between 5 and 20 feet.
the “FRONT” setting in 1
foot increments. For
example, if “FRONT” is set
to 20 feet, “SUB
WOOFER” can be set
between 5 and 20 feet.
L (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
dB in 0.5 dB increments.
R (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
dB in 0.5 dB increments.
CENTER
(0 dB)
(0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
0 dB in 0.5 dB increments.
SUBWOOFER
(0 dB)
(0 dB)
Set this between –10 dB and
0 dB in 0.5 dB increments.
0 dB in 0.5 dB increments.