Справочник Пользователя для Sony DVP-NS3100ES
77
Set
tings
and
tings
and
Ad
ju
ju
st
m
e
nt
s
◆ LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
To adjust the volume of all the speakers at
one time
one time
Use the amplifier’s (receiver’s) volume
control.
control.
◆ TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust “LEVEL.”
when you use the 5.1CH OUTPUT jacks and
adjust “LEVEL.”
Adjusting the speaker volume
and level
and level
1
Select “SPEAKER SETUP” in the Setup
Display.
Display.
2
Select “TEST TONE” and set to “ON.”
You will hear the test tone from each
speaker in sequence.
speaker in sequence.
3
From your listening position, select
“LEVEL (FRONT)” or “LEVEL (REAR)”
and adjust the value using X/x.
“LEVEL (FRONT)” or “LEVEL (REAR)”
and adjust the value using X/x.
4
Select “TEST TONE” and set to “OFF”
to turn off the test tone.
to turn off the test tone.
Note
The test tone signals are not output from the
DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI
OUT jack.
DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI
OUT jack.
L (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
0 dB in 0.5 dB increments.
R (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
0 dB in 0.5 dB increments.
OFF
The test tone is not emitted
from the speakers.
from the speakers.
ON
The test tone is emitted from
each speaker in sequence.
each speaker in sequence.