Справочник Пользователя для Sony HT-DDW99
34
US
1
Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
receiver operation is activated.
2
Press MENU.
“1-LEVEL” appears on the display.
3
Press the
or
b to enter the
menu.
4
Press
V/v repeatedly to select
“T. TONE”.
5
Press the
or
b to enter the
parameter.
6
Press
V/v repeatedly to select
“T. TONE Y”.
The test tone is output from each speaker
in sequence as follows:
Front left
in sequence as follows:
Front left
t Center t Front right t
Surround right
t Surround left t
Sub woofer
7
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
8
“T. TONE N”.
You can also press any input buttons.
The test tone turns off.
The test tone turns off.
When a test tone is not output
from the speakers
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.