Справочник Пользователя для Sony klv-23hr3

Here are some simple solutions to problems which may affect the picture and sound.

No picture (screen is dark) and no sound. • Check the aerial connection.

• Connect the TV to the mains, and press the   power switch on the 

top side of the TV set.

• If the   (standby) indicator is on, press TV 

 on the remote 

control. 

The TV turns off automatically. (The TV 

enters the standby mode.)

• Check if the Sleep Timer is activated (page 27).

No picture or no menu information from 

equipment connected to the Scart 

connector.

• Check that the optional equipment is on and press the 

/ 

 

button repeatedly on the remote control until the correct input 

symbol is displayed on the screen (page 31). 

• Check the connection between the optional equipment and the TV.

Double images or ghosting.

• Check aerial/cable connections.

• Check the aerial location and direction.

Only snow and noise appears on 

the screen.

• Check if the aerial is broken or bent.

• Check if the aerial has reached the end of its serviceable life (3-5 

years in normal use, 1-2 years at the seaside)

Dotted lines or stripes.

• Keep the TV away from electrical noise sources such as cars, 

motorcycles, or hair-dryers.

No colour on colour programmes.

• Using the menu system, select the “Picture Adjustment” menu and 

select “Reset” to return to the factory settings (page 19).

• If you set the “Power Saving” function to “Reduce,” picture colours 

may become dimmer (page 21).

Some tiny black points and/or bright

points on the screen.

• The picture of the display is composed of pixels. Tiny black points 

and/or bright points (pixels) on the screen, do not indicate a 

malfunction.

The picture is too bright.

Picture (stripe) noise.

• Using the menu system, select the “Picture Adjustment” menu and 

select “Picture Mode” Then select the desired picture mode (page 

18).

• Make sure that the aerial is connected.
• Keep the aerial cable away from other connecting cords.
• Do not use 300-ohm twin lead cables as interference may occur.

continued...