Справочник Пользователя для Sony MDS-JE480

Скачать
Страница из 32
masterpage:Left
(3 column)
lename[C:\Documents and Settings\pc13\Desktop\MDS-JE480 PMRF\Revise 
Model\J9060101_4238553151MDSJE480CEL\4238553151\GB05OPE-CEL.fm]
 model name1[MDS-JE480]
 [4-238-553-15(1)]
20
GB
Dividing recorded tracks (continued)
5
Press PUSH ENTER or YES again if the 
dividing point is correct.
“Complete!” appears and the deck starts to 
play the newly created track. Note that new 
track has no name. If the dividing point is 
not correct, adjust the point by turning AMS 
(or press ./> repeatedly) while 
monitoring the sound, and then press PUSH 
ENTER or YES when you locate the desired 
dividing point. You can shift the point by 1-
frame
 intervals (1 frame = 1/86 second).
1) You can shift the point by 2-frame intervals 
on the track recorded in Monaural mode or 
LP2 Stereo mode, and by 4-frame intervals 
on the track recorded in LP4 Stereo mode.
Tip
In step 5, if you want to shift the dividing point by a 
certain number of seconds or minutes, press m/M 
repeatedly. You can change the unit by which the 
counter advances when you turn AMS (or press 
./> repeatedly). 
You can use this function to combine 2 tracks 
into a single track. The total number of tracks 
decreases by one and all tracks following the 
combined ones are renumbered.
You can also use this function to erase 
unnecessary track numbers.
Example: Combining track 3 to track 1.
Example: Combining track 1 to track 4.
1
While the deck is stopped, playing, or 
paused, press MENU/NO.
“Edit Menu” appears in the display.
2
Turn AMS (or press ./> 
repeatedly) until “Combine?” appears, 
then press PUSH ENTER or YES.
3
Turn AMS (or press ./> 
repeatedly) until the number of the first 
track of the two tracks to be combined 
appears, then press PUSH ENTER or 
YES.
The display for selecting a second track 
appears and the deck plays the portion 
where joining will occur (the end of the first 
track and the beginning of the second track 
following it) repeatedly.
4
Turn AMS (or press ./> 
repeatedly) until the number of the 
second track of the two tracks to be 
combined appears, then press PUSH 
ENTER or YES.
“Complete!” appears and the deck starts to 
play the combined track.
Notes
• Tracks recorded in different modes (stereo, MONO, 
LP2 or LP4) cannot be combined.
• If both of the combined tracks have a track name, 
the name of the second track is erased.
• If “Impossible” appears in the display, the tracks 
cannot be combined because repeated editing has 
been done to the track(s). This is a technical 
limitation of the MD system and is not a mechanical 
error.
Combining recorded 
tracks
— Combine Function
1
2
1
2
4
3
3
A
A
C
B
D
B
C
D
Track 
number
Original 
tracks
After 
COMBINE
1
2
1
2
4
3
3
4
5
A
B
C
D
A
B
C
D
Original 
tracks
After 
COMBINE