Справочник Пользователя для Sony rdr-hxd860
C:\2886042111HXD860CEK\01GB-
HXD860CEK\090EDT.fm
master page=right
specdef 20060621
RDR-HXD860
2-886-042-11(1)
73
E
ras
in
in
g and
E
d
iti
n
g
3
Press ENTER if point A is correct.
If point A is incorrect, select point A
using c/C, and press ENTER. The
display for setting point B appears.
using c/C, and press ENTER. The
display for setting point B appears.
4
Select point B using
m
/
M
, and
press ENTER.
Playback pauses.
5
Press ENTER if point B is correct.
If point B is incorrect, select point B
using c/C, and press ENTER. The
display asks for confirmation.
• To reset point A, press
using c/C, and press ENTER. The
display asks for confirmation.
• To reset point A, press
M and
O RETURN, and go to step 2.
• To reset point B, press
M and repeat
step 4.
• To preview the title without scenes to
be erased, select “Preview” (except for
DVD+RWs).
DVD+RWs).
6
Select “OK,” and press ENTER.
The scene is erased. The display for
setting point A appears.
• To continue, go to step 2.
• To finish, select “Quit.”
setting point A appears.
• To continue, go to step 2.
• To finish, select “Quit.”
z
Hint
A chapter mark is inserted after the scene was
erased. The chapter mark divides the title into
separate chapters on either side of the mark.
erased. The chapter mark divides the title into
separate chapters on either side of the mark.
b
Notes
• Images or sound may be momentarily interrupted
at the point where you erase a section of a title.
• Sections shorter than five seconds may not be
erased.
• For DVD+RWs, the erased section may be
slightly different from the points you selected.
If you want to dub a long title to a disc but do
not want to reduce the picture quality, divide
the title into two shorter titles. Note that
dividing a title cannot be undone.
not want to reduce the picture quality, divide
the title into two shorter titles. Note that
dividing a title cannot be undone.
* Only playlist titles can be divided for DVD-RWs/
DVD-Rs (VR mode).
1
Press TITLE LIST.
Press
<
/
,
to switch the Title Lists, if
necessary.
2
Select a title, and press ENTER.
The sub-menu appears.
3
Select “Divide,” and press ENTER.
The display for setting the dividing point
appears, and the title starts to play.
• To return to the beginning of the title,
appears, and the title starts to play.
• To return to the beginning of the title,
press X and then press ..
4
Select the dividing point by pressing
m
m
/M, and press ENTER.
Playback pauses.
5
Press ENTER if the dividing point is
correct.
correct.
If the dividing point is incorrect, select
the dividing point using c/C, and
press ENTER. The display asks for
confirmation.
• To change the dividing point, press
the dividing point using c/C, and
press ENTER. The display asks for
confirmation.
• To change the dividing point, press
M
.
6
Select “OK,” and press ENTER.
The title is divided in two.
z
Hint
After a title is divided, the title name prior to
division is assigned to both the first and second
parts.
division is assigned to both the first and second
parts.
Dividing a title (Divide)
-RW
VR
HDD
-R
VR
*
*
,continued