Справочник Пользователя для Panasonic cf-72n3xxxxx

70

Has the disk been correctly inserted?
Has the disk been correctly formatted?
Has the Setup Utility been used to set [SuperDisk Operation] to [Enable]?

Your disk content may be corrupted.

Is the disk write-protected?
Select [Format] in [My Computer] - [3 1/2 Floppy (A:)]  - [File].  After confirming the
disk volume and format type, start formatting.

Your drive or file may not have been properly set.
Check to see if the hard disk is full.  If it is full, delete unnecessary files.
Your hard disk content may be corrupted.  Contact Panasonic Technical Support.

Try testing another drive or media.

You may need to clean the lens or disc.

Is the CD-ROM/DVD-ROM drive properly mounted in the multimedia pocket?

Did you restart the computer after installing the drivers?

Is the disc loaded on the tray correctly?

Is the disc bent, scratched, or dirty?

Is the computer powered on?
To remove a disc (disk) when the computer
is powered off, insert a sharp object such
as the bent-out tip of a paper clip into the
emergency hole.  Pushing it completely to
the end will free the tray so that it can be
pulled out.

Did you open the CD-ROM/DVD-ROM drive or remove the MPEG disc while it was
operating?
Re-insert the MPEG disc and close the CD-ROM/DVD-ROM drive.  Press   Enter   .

Is the disc bent labeled?
Set the [CD Drive Speed] to [Low] in the Setup Utility. (

Did you touch the eject button when you close the tray?

Emergency Hole

Emergency Hole

      <CD-ROM drive>      <DVD-ROM drive>

Emergency Hole

      <SuperDisk drive>

<SuperDisk drive>
However, because there is the possibility
that the lock mechanism of the head car-
riage may not move, do not use this
method except for emergencies.