Справочник Пользователя для Panasonic CQ-C1200U

15

14

Caution: To ensure safety, never attempt to preset sta-
tions while you are driving.

 Use manual or seek tuning to find a station.

(

➡

page 14)

 Press and hold one of the preset buttons from

[1] to [6] until the display blinks once.

Press [BAND] to select a desired band. 
(

➡

page 14)

q

w

Press the corresponding preset button from
[1] to [6] to tune in a preset station.

Press and hold [BAND] (APM: auto preset memory) for more than 2 seconds.
• The 6 stations with good reception will be automatically saved in the memory under preset buttons

from [1] to [6].

• Once set, the preset stations are sequentially scanned for 5 seconds each.

Preset buttons from [1] to [6]

Up to 6 stations each can be saved in the FM1,
FM2, FM3 and AM preset station memories.

Note:  Existing saved stations are overwritten with
new stations after following this procedure.

Press [DISP] (display) to switch to the clock display.

Frequency

Clock display

blinks once

[l TUNE]: Higher frequency
[k TUNE]: Lower frequency

Press and hold ...
[l TUNE]: Higher frequency
[k TUNE]: Lower frequency
Tuning will automatically stop when the signals of the next
broadcast station are received.

Press [BAND] to change the band.

Your favorite FM/AM radio station can be memorized in the 

button and you can call back the radio station just by

pressing the button whatever the current sound source is, even if the power is off.

Press [D·M]. 

(Press again to cancel)

¡The direct memoried station is received.

lights

Default: FM 87.9 MHz

e

R

elease 

[D·M] button

. Then, new station will be

overwritten on existing saved station.

 Press and hold [D·M] until the 

Frequency display blinks

.

blinks

 Select the station in Radio mode (

a

Press  [SRC] (source) to change
to the radio mode.

FM Stereo indicator